SLT 2012 Paper Submission Kit


Table of Contents

Part 1: General Information

Part II: Preparation of the Paper

Part III: Submission and Review of the Paper

Part IV: Preparation of the Presentation


Part I: General Information

Procedure

The SLT 2012 paper submission and review process is being conducted in a manner similar to previous SLT conferences:

The review process is being conducted entirely online. To make the review process easy for the reviewers, and to assure that the paper submissions will be readable through the online review system, we ask that authors submit paper documents that are formatted according to the Paper Kit instructions included here.

Requirements

Papers may be no longer than 6 pages, including all text, figures, and references.

Papers must be submitted by the deadline date. There will be no exceptions.

Accepted papers MUST be presented at the conference by one of the authors, or, if none of the authors are able to attend, by a qualified surrogate. The presenter MUST register for the conference at one of the non-student rates offered, and MUST register before the deadline given for author registration. Failure to register before the deadline will result in automatic withdrawal of your paper from the conference proceedings and program. A single registration may cover up to two (2) papers.

Deadlines and Important Dates

Paper SubmissionJuly 20, 2012
Acceptance NotificationSeptember 7, 2012

Correspondence

Please make sure to put the conference name (SLT 2012) and the paper number that is assigned to you on all correspondence.

Additional questions regarding submission of papers should be directed to the following address:

SLT 2012
Conference Management Services, Inc.
3833 Texas Avenue S., Suite 221
Bryan, TX 77802-4015, USA
(979) 846-6800
(979) 846-6900 [fax]
papers@slt2012.org


Part II: Preparation of the Paper

Document Formatting

Use the following guidelines when preparing your document:

LENGTH: You are allowed a total of 6 pages for your document. This is the maximum number of pages that will be accepted, including all figures, tables, and references. Any documents that exceed the 6 page limit will be rejected.

LANGUAGE : All submissions must be in English.

MARGINS : Documents should be formatted for standard letter-size (8-1/2" by 11" or 216mm by 279mm) paper . Any text or other material outside the margins specified below will not be accepted:

A format sheet with the margins and placement guides is available in the following file formats:

These files contain lines and boxes showing the margins and print areas. If you print one of these files, then stack it atop your printed page and hold it up to the light, you can easily check your margins to see if your print area fits within the space allowed.

TYPE :

Face : To achieve the best viewing experience for the review process and conference proceedings, we strongly encourage authors to use Times-Roman or Computer Modern fonts. If a font face is used that is not recognized by the submission system, your proposal will not be reproduced correctly.

Size : Use a font size that is no smaller than 9 points throughout the paper, including figure captions. In 9-point type font, capital letters are 2 mm high. For 9-point type font, there should be no more than 3.2 lines/cm (8 lines/inch) vertically. This is a minimum spacing; 2.75 lines/cm (7 lines/inch) will make the proposal much more readable. Larger type sizes require correspondingly larger vertical spacing.

TITLE : The paper title must appear in boldface letters and should be in ALL CAPITALS. Do not use LaTeX math notation ($x_y$) in the title; the title must be representable in the Unicode character set. Also try to avoid uncommon acronyms in the title.

AUTHOR LIST : The authors' name(s) and affiliation(s) appear below the title in capital and lower case letters. Proposals with multiple authors and affiliations may require two or more lines for this information. The order of the authors on the document should exactly match in number and order the authors typed into the online submission form.

ABSTRACT : Each paper should contain an abstract of 100 to 150 words that appears at the beginning of the document. Use the same text that is submitted electronically along with the author contact information.

INDEX TERMS (KEYWORDS) NEW : Enter up to 5 keywords separated by commas. Keywords may be selected from the IEEE keyword list found at: http://www.ieee.org/organizations/pubs/ani_prod/keywrd98.txt .

BODY : Major headings appear in boldface CAPITAL letters, centered in the column. Subheadings appear in capital and lower case, either underlined or in boldface. They start at the left margin of the column on a separate line. Sub-subheadings are discouraged, but if they must be used, they should appear in capital and lower case, and start at the left margin on a separate line. They may be underlined or in italics.

REFERENCES : List and number all references at the end of the document. The references can be numbered in alphabetical order or in order of appearance in the paper. When referring to them in the text, type the corresponding reference number in square brackets as shown at the end of this sentence [1]. The end of the document should include a list of references containing information similar to the following example:

[1] D. E. Ingalls, "Image Processing for Experts," IEEE Trans. ASSP, vol. ASSP-36, pp. 1932-1948, 1988.

ILLUSTRATIONS & COLOR : Illustrations must appear within the designated margins. They may span the two columns. If possible, position illustrations at the top of columns, rather than in the middle or at the bottom. Caption and number every illustration. All halftone illustrations must be clear in black and white. Since the printed proceedings will be produced in black and white, be sure that your images are acceptable when printed in black and white (the CD-ROM and IEEE Xplore proceedings will retain the colors in your document).

PAGE NUMBERS: Do not put page numbers on your document . Appropriate page numbers will be added to accepted papers when the conference proceedings are assembled.

Templates

The following style files and templates are available for users of LaTeX and Microsoft Word:

We recommend that you use the Word file or LaTeX files to produce your document, since they have been set up to meet the formatting guidelines listed above. When using these files, double-check the paper size in your page setup to make sure you are using the letter-size paper layout (8.5" X 11"). The LaTeX environment files specify suitable margins, page layout, text, and a bibliography style.

In particular, with LaTeX, there are cases where the top-margin of the resulting Postscript or PDF file does not meet the specified parameters. In this case, you may need to add a \topmargin=0mm command just after the \begin{document} command in your .tex file. The spacing of the top margin is not critical, as the page contents will be adjusted on the proceedings. The critical dimensions are the actual width and height of the page content.


Part III: Submission and Review of the Paper

The review process will be performed from the electronic submission of your paper. To ensure that your document is compatible with the review system, please adhere to the following compatibility requirements:

File Format

The 'IEEE Requirements for PDF Documents' MUST be followed EXACTLY . The conference is required to ensure that documents follow this specification. The requirements are enumerated in:

Papers must be submitted in either PostScript (PS) or Adobe's Portable Document Format (PDF) format.

PDF and Postscript files:

ALL FONTS MUST be embedded in the PDF or PostScript file. There is no guarantee that the viewers of the paper (reviewers and those who view the proceedings CD-ROM after publication) have the same fonts used in the document. If fonts are not embedded in the submission, you will be contacted by CMS and asked to submit a file that has all fonts embedded. Please refer to your PDF or PS file generation utility's user guide to find out how to embed all fonts.

Information for LaTeX users

Generating a PostScript file is straightforward for all LaTeX packages we are aware of. When preparing the proposal under LaTeX, it is preferable to use scalable fonts such as Type I, Computer Modern. However, quite good results can be obtained with the fonts defined in the style file recommended above (spconf.sty).

PDF files with Postscript Type 3 fonts are highly discouraged. PDF and PostScript files utilizing Type 3 fonts are typically produced by the LaTeX system and are lower-resolution bitmapped versions of the letters and figures. It is possible to perform a few simple changes to the configuration or command-line to produce files that use PostScript Type 1 fonts, which are a vector representation of the letters and figures. An excellent set of instructions is found at:

Creating quality Adobe PDF files from TeX with DVIPS

For most installations of LaTeX, you can cause dvips to output Type 1 fonts instead of Type 3 fonts by including -Ppdf option to dvips . The resulting Postscript file will reference the Type 1 Computer Modern fonts, rather than embedding the bitmapped Type 3 versions, which cause problems with printers.

You may also need to tell dvips to force letter sized paper with the option: -t letter .

Some LaTeX installations also include pdflatex , which produces acceptable PDF files as well.

Creating a Postscript (PS) File

Windows users: To save a document as a PostScript file:

Macintosh users: To save a document as a PostScript file:

File Size Limit

Authors will be permitted to submit a document file up to 5 MB (megabytes) in size. To request an exception, contact the paper submission technical support at: papers@slt2012.org.

File Name

The filename of the document file should be the first author's last name, followed by the appropriate extension (.ps or .pdf). For example, if the first author's name is Johan Smith, you would submit your file as "smith.ps" or "smith.pdf". To speed transmission of your PostScript and PDF files, you may use a compression utility that will produce compressed archives that are 100% compatible with the ZIP compression format defined by PKWare or the GZip format common on UNIX and Linux systems. Such a utility can be downloaded from PKWare's website at: www.pkware.com . This compression is not required, but it is allowed and encouraged so that file transfer times may be reduced. If you do submit a compressed version of the document file, use the same filename specification mentioned earlier, with the appropriate file extension (for example, "smith.zip" or "smith.gz"). The paper submission process will append the filename with a unique identifier when it is stored on our system, so multiple submissions with the same name will not overwrite each other and will be distinguishable.

Electronic Paper Submission

When you have your document file ready, gather the following information before entering the submission system:

To submit your document and author information, go to the 'Paper Submission' on the SLT 2012 homepage:

http://www.slt2012.org/

The submission system will present an entry form to allow you to enter the paper title, abstract text, review category, and author contact information.

ALL authors must be entered in the online form, and must appear in the online form in the same order in which the authors appear on the PDF.

After you submit this information, the system will display a page with the data that you entered so that you may verify its accuracy. If you need to change the data to fix a mistake, you may use the back button on your browser to return to the information entry form. Once you approve of the data that you have entered, you may choose your document file for upload at the bottom of the verification page. When you click on the button labeled 'Continue' at the bottom of this page, the page will check the filename extension to make sure it matches the submission criteria, then your browser will upload your file to our server. Depending on the size of your file and your internet connection speed, this upload may take a few minutes. At the end of a successful upload, you will see a confirmation page displaying the paper number that is assigned to you, and and email message will be sent to the authors' email addresses to confirm that the file has been uploaded. If you do not see the confirmation page after uploading your file, we may not have successfully received your file upload. If you encounter trouble, contact the paper submission support at: papers@slt2012.org .

IEEE Copyright Transfer Form

The copyright form is not required to be submitted until the final submission stage, after the list of accepted papers has been announced. Only authors of accepted papers are required to send the copyright form.

The confirmation page that is displayed after uploading your final, camera-ready document file will also have a link to the IEEE Electronic Copyright Form (eCF) system. That system will guide you through a series of questions to determine the type of copyright form required for your manuscript and will electronically record your signature. You will have the opportunity to download a PDF version of your electronically-signed copyright form, and both the IEEE eCF system and the SLT 2012 system will send you a confirmation of the receipt of the properly signed form.

Online Review Process

Your submitted paper will be converted to PDF format by the submission system if necessary, then visually inspected by our submission system staff to assure that the document is readable and meets all formatting requirements to be included in a visually pleasing and consistant proceedings publication for SLT 2012. If our submission inspectors encounter errors with your submitted file, they will contact you to resolve the issue. If your paper passes inspection, it will be entered into the review process. A committee of reviewers selected by the conference committee will review the documents and rate them according to quality, relevence, and correctness. The conference technical committee will use these reviews to determine which papers will be accepted for presentation in the conference. The result of the technical committee's decision will be communicated to the submitting authors by email, along with any reviewer comments.

Monitor Your Submission Status

After you submit your document, you may monitor the status of your paper as it progresses through the submission and review process by using the Paper Status website available at:

http://www.slt2012.org/Papers.asp

Notification of Acceptance

Authors will be notified of paper acceptance or non-acceptance by email as close as possible to the published author notification date. The email notification will include the presentation format chosen for your paper (lecture or poster) and may also include the presentation date and time, if available.

The notification email will include comments from the reviewers. The conference cannot guarantee that all of the reviewers will provide the level of comment desired by you. However, reviewers are encouraged to submit as detailed comments as possible.

Because of the short amount of time between paper acceptance decisions and the beginning of the publication process, SLT 2012 is not able to allow for a two-way discourse between the authors and the reviewers of a paper. If there appears to be a logistical error in the reviewer comments, such as the reviewer commenting on the wrong paper, etc., please contact SLT 2012 at papers@slt2012.org .

Required Author Registration

Be sure that at least one author registers to attend the conference using the online registration system available through the conference website. Each paper must have at least one author registered at a non-student rate, with the payment received by the author registration deadline (see above) to avoid being withdrawn from the conference.

http://www.slt2012.org

Copyright Issues for Web Publication

If you plan to publish a copy of an accepted paper on the Internet by any means, you MUST display the following IEEE copyright notice on the first page that displays IEEE published (and copyrighted) material:

Copyright 2012 IEEE. Published in the 2012 IEEE Workshop on Spoken Language Technology (SLT 2012), scheduled for December 2-5, 2012 in Berkeley, California, USA. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works, must be obtained from the IEEE. Contact: Manager, Copyrights and Permissions / IEEE Service Center / 445 Hoes Lane / P.O. Box 1331 / Piscataway, NJ 08855-1331, USA. Telephone: + Intl. 908-562-3966.

If you post an electronic version of an accepted paper, you must provide the IEEE with the electronic address (URL, FTP address, etc.) of the posting.


Part IV: Preparation of the Presentation

To help authors prepare for lecture and poster presentations, the following suggestions have been created:

Lecture Presentations (Best Paper Presentations)

PRESENTATION TIME: Presentation time is critical; each paper is allocated 25 minutes for lecture sessions, including time for questions, and any set up that is not completed in advance. An additional 5 minutes is allocated prior to each presentation for the introduction of the speaker and presentation of the best paper award. To achieve appropriate timing, organize your slides or viewgraphs around the points you intend to make, using no more than one slide per minute. A reasonable strategy is to allocate about 2 minutes per slide when there are equations or important key points to make, and one minute per slide when the content is less complex. Slides attract and hold attention, and reinforce what you say - provided you keep them simple and easy to read. Plan on covering at most 6 points per slide, covered by 6 to 12 spoken sentences and no more than about two spoken minutes.

Be prepared to begin your presentation as soon as the introduction is concluded; it is important to keep on schedule.

ORGANIZATION OF IDEAS: Make sure each of your key points is easy to explain with aid of the material on your slides. Do not read directly from the slide during your presentation. You shouldn't need to prepare a written speech, although it is often a good idea to prepare the opening and closing sentences in advance. It is very important that you rehearse your presentation in front of an audience before you give your presentation at SLT. Surrogate presenters must be sufficiently familiar with the material being presented to answer detailed questions from the audience. In addition, the surrogate presenter must contact the Session Chair in advance of the presenter's session.

Poster Presentations

Poster sessions are a good medium for authors to present papers and meet with interested attendees for in-depth technical discussions. In addition, attendees find the poster sessions a good way to sample many papers in parallel sessions. Thus it is important that you display your message clearly and noticeably to attract people who might have an interest in your paper.

The poster session is 90 minutes long. All posters should remain on the boards for the entire session time. Everyone should mount their poster on the boards before the session begins. Please arrive the room 15 minutes before your session begins.

You should prepare a 5-minute explanation of your work, concentrating on the key innovation, and be ready to interact with the audience that approaches your poster. Please put up your poster during the break before the session, and take it down during the break immediately following the session. Pushpins and tape will be available to mount the poster. If you have difficulty locating them, please contact the session chairs. If you need extra presentation materials, such as a video display or computer, you will be required to bring them yourself. Also note that any equipment used in the poster area should be battery-operated, since power will not be provided on the floor.

If your poster is constructed of multiple pieces of paper, it is highly recommended that you plan to be at your poster location sufficiently in advance to allow you to complete mounting of your poster prior to of the start of your presentation block. Alternatively, you may consider taping together all of the pieces before you mount the poster on the board to speed up the mounting process.

DIMENSIONS: The poster board will be 6 feet (183 cm) wide by 4 feet (122 cm) tall. Poster boards will be numbered. Push tacks or velcro adhesive will be provided at the conference to mount your poster to the board.

ORGANIZATION OF IDEAS: Your poster should cover the key points of your work. It need not, and should not, attempt to include all the details; you can describe them in person to people who are interested. The ideal poster is designed to attract attention, provide a brief overview of your work, and initiate discussion. Carefully and completely prepare your poster well in advance of the conference. Try tacking up the poster before you leave for the conference to see what it will look like and to make sure that you have all of the necessary pieces.

FORMATTING: The title of your poster should appear at the top in CAPITAL letters about 25mm high. Below the title put the author(s)' name(s) and affiliation(s). The flow of your poster should be from the top left to the bottom right. Use arrows to lead your viewer through the poster. Use color for highlighting and to make your poster more attractive. Use pictures, diagrams, cartoons, figures, etc., rather than text wherever possible. Try to state your main result in 6 lines or less, in lettering about 15mm high so that people can read the poster from a distance. The smallest text on your poster should be at least 9mm high, and the important points should be in a larger size. Use a sans-serif font (such as "cmss" in the Computer Modern family or the "Helvetica" PostScript font) to make the print easier to read from a distance.

Make your poster as self-explanatory as possible. This will save your efforts for technical discussions. There will not be any summaries given at the beginning of the poster sessions, so authors need not prepare any overhead slides for their poster presentations. You may bring additional battery-operated audio or visual aids to enhance your presentation. No electricity will be available for use by poster presenters.

TIME: Prepare a short presentation of about 5 or 10 minutes that you can periodically give to those assembled around your poster throughout the poster session. If possible, more than one author should attend the session to aid in presentations and discussions, and to provide the presenters with the chance to rest or briefly view other posters.

(End of File)